Swastik Machine Tool
banner

Workshop Machinery

Workshop machinery helps in efficiently increasing labor productivity and achieves consistent quality of products. Swastik Machine Tools is renowned for providing the best workshop machinery that meets world class standards.

Turning

Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helix toolpath by moving more or less linearly while the workpiece rotates. The tool's axes of movement may be literally a straight line, or they may be along some set of curves or angles, but they are essentially linear.



Pinacho machines are designed according to international standards and manufactured with only the best raw materials. Strength, durability and accuracy are what make these machines stand apart from the competition.

Features:
pinacho
  • Made of high quality steel
  • Shafts are mounted on needle bearings in an oil bath
  • High working capacity due to a well proportioned headstock made of GG 25 casting
  • Completely enclosed apron
  • Higher access without changing too many gears
  • Cross Slide and top slide provided with adjustable cast iron taper gibs
  • IP-44 protection for main electrical system and stop/start switch
  • Strongly built tailstock

Specifications :
CAPACITY
Centre height
mm 200 250 285
Centre distance
mm 750 / 1000 1000/1500 1000/1500





2000/3000
Swing over bed
mm 400 500 570
Swing over gap
mm 560 700 830
Swing over carriage
mm 335 440 530
Swing over cross slide
mm 245 310 370
Bed width
mm 250 300 350
Gap length in from of face plate
mm 120 160 220
HEAD STOCK
Main Spindle bore
mm 42 52 80
Main Spindle nose

A2 - 5/ A2 - 6/ A2 - 8/



Camlock No.5 Camlock No.6 Camlock No.8
Main spindle morse taper
No 4 4 4
No of speed range

9 12 12
Speed Range
R.P.M 60 -2000 40 - 2200 30 - 1500
THREAD AND FEED BOX
Longittudinal feeds 44 55 0.044 - 0.662 0.044 - 0.662 0.044 -1.324
Cross feeds 44 55 0.020 - 0.296 0.020 - 0.296 0.020 - 0.592
Metric threads 44 55 0.5 - 7.5 0.5 - 7.5 0.5 -15
Whitworth threads in T.P.I 44 55 60 - 4 60 - 4 60 - 2
Modular thread 44 55 0.25 - 3.75 0.25 - 3.75 0.25 - 7.5
Pitch Diametral threads 44 55 120 - 8 120 - 8 120 - 4
Threads of lead screw mm 6 6 6
SLIDE AND CARRIAGE
Cross slide travel
mm 245 250 310
Tool post slide travel
mm 105 130 130
Maximum tool dimensions
mm 20 x 20 25 x 25 25 x 25
TAIL STOCK
Tail stock barrel diameter
mm 58 68 82
Tail stock barrel travel
mm 180 200 220
Tail stock barrel taper
No 4 4 5
MOTORS
Main motor power
Kw 4 5.5 7.5
Pump motor power
Kw 0.1 0.1 0.1
STEADIES
Min - Max capacity of fixed steady
mm 10 - 125 10 - 145 10 - 185
Min - Max capacity of traveling steady
mm 10 - 90
10 - 95
10 - 130

Standard Accessories Optional Accessories
Spindle Brake Universal 3 - jaw chuck Rear toolpost
Reducing bush Face plate Quick change toolpost with 4 tool holders
2 fixed centres Driving plate Tool holders for quick change toolpost
Thread dial indicator Chuck back plate Morse taper live center
Square toolpost and key Independent 4-jaw chuck 4 position stop for carriage
Chip collecting tray Universal 4- jaw chuck 4 position stop for cross slide
Instruction manual Fixed steady rest Micrometer carriage stiop
Centralized lubrication of carriage cross slide and chariot Follow steady rest Telescope taper turing attachment
Coolant equipment Steady rest arms with rollers Collets
Rear splash guard Digital readout Jaws for universal chucks
Emergency stop Soft starter Set of spanners and keys
Main switch Drill chuck Leveling plates
Low voltage lighting Collet chuck
Rigid lead screw guard

Features:
hicut
  • Dead Centre with Centre Sleeve
  • Machine Lamp
  • Coolant Pump with Cock Equipment
  • Oil Gun
  • Dog Plate
  • Dead Centre for Tailstock
  • Tool Kit
  • Thread Dial Indicator
  • Square Tool Post
  • Rear Splash Guard

Specifications :
Description HI -CUT 3503 HI -CUT 4005
Threads
No.of metric threads 24 / 0.5-7 25 / 0.5-7
Range mm mm
No. of inch threads 24 / 56-4 25 / 56-4
Range TPI TPI
Maximum Weight of Work piece held between Chuck and Tail Stock Centre
Dead centre 185 KG 185 KG
Live Centre 150 KG 150 KG
Electricals
Main Motor 2.2 kw 3.7 Kw

(3HP) (5HP)
Power Supply 415V 415V

3 phase 3 phase
50 cycles 50 cycles
A/C supply A/C supply
Coolant Tank Capacity 25 ltrs 25 ltrs
Weight
ABC 800 950 kg
ABC 1000 1100 kg 1150 kg
ABC 1500
1500 kg
Floor Space
L X B 800 ABC 2000 x 850

(6.5' x 3')
1000 ABC 2200 x 850 2200 x 850

(7.5' x 3') (7.5' x 3')
1500 ABC
2700 x 850


(9' x 3')
Capacity of Steady Rest Bar Dia 'D'
Pad Type Minimum Dia 10 (0.5") 10 (0.5")

Maximum Dia 100 (4") 100 (4")
Roller Type Minimum Dia 10 (0.5") 10 (0.5")

Maximum Dia 75(3") 75(3")
Capacity of Taper Turning Attachment
Maximum Taper angle on either side Stroke 'S' 10° 10°
Stroke 'S' 175 (7') 175 (7')
Maximum Turning Length 'L' 125 (5') 125 (5')

Description HI -CUT 3503 HI -CUT 4005
Capacity
Height of the centres 175 (7") 200 (8")
Swing over bed 350 (14") 400 (16")
Swing over cross slide 200 (8") 250 (10")
Swing in Gap Y 500 (20") 550 (22")
Distance in front of face plate in Gap 'X' 125 (5") 125 (5")
Distance between Centres
ABC 800 800 (31")
ABC 1000 1000(40") 1000 (40")
ABC 1500
1500 (60")
Cross Slide Travel 185 (7.5") 185 (7.5")
Cross Slide Resolution 0.02 mm 0.02 mm
Bed
Bed Type 2V, 2flat 2V, 2flat
Bed Width 244 244
Bed Length
ABC 800 1700 (6")
ABC 1000 1900 (6.5) 1900 (6.5)
ABC 1500
2388 (8")
Main Spindle
Spindle Nose A2 - 4 A2 - 6
Spindle Taper Bore Metric 45 Metric 60
Taper Bore in Centre Sleeve MT 3 MT 3
Spindle Bore 40 55
Tall Stock
Quill Diameter 50 50
Taper Bore in Spindle MT3 MT3
Quill Travel 140 (5.5") 140 (5.5")
Tool Slide
Travel Top Slide 100 (4") 100 (4")
Tool Shank Selection 20 X 20 25 x 25
Tool Slide Resolution 0.02 0.02
Lead Screw
Lead Screw Diameter 30 30
Pitch 6.0 6.0
Speeds
No. of Speeds 8 9
Range 71 - 1800 71 - 1600
Feeds
No. of Longitudinal Feeds 24 24
Range of Feeds 0.045 to 0.63 0.045 to 0.63
No. of Transverse Feeds 24 24
Range of Feeds 0.015 to 0.21 0.015 to 0.21
Ratio of Transverse Feed to Longitudinal Feeds 1 | 3 1 | 3

Features:
crown
  • Bed casting made of close-grained cast iron, capable to withstand heavy load
  • Casting of Headstock is seasoned and graded
  • Bearing is prepared from high grade lead bronze which gives good lubrication and vibration-less performance
  • Spindle and screws manufactured from EN-8 steel
  • Strict inspections and quality checks on gears

Specifications :
CAPACITY DATA HLM -1 HLM -2 HLM -3 HLM -4 HLM -5
Length of bed 1676 mm (5'6") 2130 mm (7') 2740 mm (9') 3048 mm(10') 3657 mm (12')
Center Height 255 mm (10") 255 mm (10") 255 mm (10") 255 mm (10") 255 mm (10")
Maximum Swing over Bed 508 mm (20") 508 mm (20") 508 mm (20") 508 mm (20") 508 mm (20")
Maximum Swing over Carriage 305 mm (12") 305 mm (12") 305 mm (12") 305 mm (12") 305 mm (12")
Maximum Swing Gap 787 mm (31") 787 mm (31") 787 mm (31") 787 mm (31") 787 mm (31")
Length of Gap inn front of Face plate 200 mm (8") 200 mm (8") 200 mm (8") 200 mm (8") 200 mm (8")
Admit between centres 558 mm (22") 1015 mm (40") 1625 mm (64") 1930 mm (76") 2540 mm (100")
Width of Bed 323 mm (12.3/4") 323 mm (12.3/4") 323 mm (12.3/4") 323 mm (12.3/4") 323 mm (12.3/4")
Length of Gap 305 mm (12") 305 mm (12") 305 mm (12") 305 mm (12") 305 mm (12")
Spindle Nose Dia /Threads 76 mm x 6 TPI 76 mm x 6 TPI 76 mm x 6 TPI 76 mm x 6 TPI 76 mm x 6 TPI

3" X 6 TPI 3" X 6 TPI 3" X 6 TPI 3" X 6 TPI 3" X 6 TPI
Spindle Bore 52 mm (2") 52 mm (2") 52 mm (2") 52 mm (2") 52 mm (2")
Taper of Bore MT - 4 MT - 4 MT - 4 MT - 4 MT - 4
Spindle Speeds No. 8 8 8 8 8
Tail Stock Spindle Diameter 50 mm (2") 50 mm (2") 50 mm (2") 50 mm (2") 50 mm (2")
Travel 180 mm(7.1/2") 180 mm(7.1/2") 180 mm(7.1/2") 180 mm(7.1/2") 180 mm(7.1/2")
No of Threads/Range Matric -13 1 to 6 Pitch 1 to 6 Pitch 1 to 6 Pitch 1 to 6 Pitch 1 to 6 Pitch
Inch 019 2 to 24 TPI 2 to 24 TPI 2 to 24 TPI 2 to 24 TPI 2 to 24 TPI
Lead Screw Dia/Threads 38mm x 4 TPI 38mm x 4 TPI 38mm x 4 TPI 38mm x 4 TPI 38mm x 4 TPI

1.1/2" x 4 TPI 1.1/2" x 4 TPI 1.1/2" x 4 TPI 1.1/2" x 4 TPI 1.1/2" x 4 TPI
Power of AC Motor 3ph. 50 Cycles 2 HP 1440 RPM 2 HP 1440 RPM 2 HP 1440 RPM 2 HP 1440 RPM 2 HP 1440 RPM
Standard Accessories for Heavy duty lathe Machine
Chuck plate , Face plate , Change Gearset (inch & mm) Steady rest, Tool post key, 2 Nose dead centres, 1 Nose adaptors Motor Pulle
Note
(1) As imrovement are constantly made in our machines the above specifications are subject to change wihtout notice and are not binding on us
(2) All Specifications are in millimeter and the conversion of mm into inches is approximate .
Back to top