Workshop Machinery
Workshop machinery helps in efficiently increasing labor productivity and achieves consistent quality of products. Swastik Machine Tools is renowned for providing the best workshop machinery that meets world class standards.
MILLING
Milling machines are very versatile. They are usually used to machine flat surfaces, but can also produce irregular surfaces. They can also be used to drill, bore, cut gears, and produce slots. The type of milling machine most commonly found is a vertical spindle machine with a swiveling head.
Features:
- 3 Tee slots of 0.5 inch
- Vertical traverse of 15 inches
- 45 inch swivel either side of the center
- 7 inches cross
- Longitudinal Traverse of 19 inches
- 1 inch Standard Arbor
- Taper of Spindle M.T.3
- 6 spindle feeds
- 60 to 545 range of spindle speed
- 3 gallon coolant tank capacity
- 2 longitudinal feeds
- 2.5 inches diameter of spindle
Specifications :
SPECIFICATION |
S -2H |
TABLE |
|
Working surface |
1125 x 250 mm |
No. of T- Slots & Size |
3 x 16mm |
Distance betn.T-Slots |
63mm |
Table swivelling on either size |
± 25 degree± 25 degree |
RANGE |
|
Cross feed by hand |
250mm |
Vertical feed by hand |
425mm |
Longitudinal feed by hand/auto |
600 / 525 mm |
After mounting vertical attachment, vertical movement |
300 mm |
Max safe weigh on table |
150 Kgs. |
SPINDLE |
|
Spindle arbour |
25.4 mm |
No.of spindle speed |
8 |
Range of spindle speed |
50 -800 mm |
Spindle nose taper |
ISO - 40 |
Size of hole through spindle |
22 mm |
Distance from base of over arm to spindle center |
143 mm |
Spindle bearing front |
32214 |
Spindle bearing rear |
32211 |
FEEDS |
|
No.of feeds |
4 |
Longitudinal feed mm/rev. |
0.09, 0.14, 0.20, 0.45 |
DRIVE |
|
Spindle moto 1440RPM |
1.5 kW/ 2 hp |
Coolant pump motor |
1 kW/10hp |
PACKING DETAILS |
|
Floor space |
620 x 1030 mm |
Height |
1680 mm |
Weight |
1600 Kgs (Approx.) |
Wood Box Size (L x B x H) |
1430 x 1330 x 1680 mm |
SPECIFICATION |
S -3H |
TABLE |
|
Working surface |
1400 x 280 mm |
No. of T- Slots & Size |
3 x 16mm |
Distance betn.T-Slots |
63mm |
Table swivelling on either size |
± 45 degree± 45 degree |
RANGE |
|
Cross feed by hand |
280mm |
Vertical feed by hand |
525mm |
Longitudinal feed by hand/auto |
700 / 725 mm |
After mounting vertical attachment, vertical movement |
380 mm |
Max safe weigh on table |
200 Kgs. |
SPINDLE |
|
Spindle arbour |
25.4 mm (1") |
No.of spindle speed |
12 |
Range of spindle speed |
70 -1000 mm |
Spindle nose taper |
ISO - 40 |
Size of hole through spindle |
22 mm |
Distance from base of over arm to spindle center |
165 mm |
Spindle bearing front |
32214 |
Spindle bearing rear |
32211 |
FEEDS |
|
No.of feeds |
4 |
Longitudinal feed mm/rev. |
0.05, 0.7, 0.11, 0.25 |
DRIVE |
|
Spindle moto 1440 RPM |
2.2 kW/ 3 hp |
Coolant pump motor |
1 Kw / 10hp |
PACKING DETAILS |
|
Floor space |
700 x 1220 mm |
Height |
1880 mm |
Weight |
2500 Kgs (Approx.) |
Wood Box Size (L x B x H) |
1750 x 1550 x 1880 mm |
SPECIFICATION |
SA -2H |
TABLE |
|
Working surface |
1125 X 250 mm |
No. of T- Slots & Size |
3 x 16mm |
Distance betn.T-Slots |
63mm |
Table swivelling on either size |
± 25 degree |
MOVEMENT |
|
Longitudinal - Manual |
600 mm |
- Feed |
525 mm |
Cross - Manual |
250 mm |
- Feed |
220 mm |
Vertical - Manual |
425 mm |
- Feed |
400 mm |
CUTTER SPINDLE |
|
Spindle taper |
ISO - 40 |
Front bearing |
32214 |
Head swivelling to both side |
± 25 degree± 25 degree |
SPEEDS |
|
No of Speeds |
8 (50 to 800) |
FEEDS |
|
No.of feeds |
9 |
Range - Longitudinal |
16 to 599 mm/min |
- Cross |
24 to 898 mm /min |
- Vertical |
4 to 148.50 mm/min |
POWER |
|
Cutter spindle motor 1440 RPM |
2 hp |
Feed motor 960 RPM |
1.5 kW/ 2 hp |
Coolant pump motor |
1 Kw / 10hp |
PACKING DETAILS |
|
Floor space |
620 x 1030 mm |
Height |
1680 mm |
Weight |
2200 Kgs (Approx.) |
Wood Box Size (L x B x H) |
1430 x 1330 x 1680 mm |
SPECIFICATION |
SA -3H |
TABLE |
|
Working surface |
1125 X 250 mm |
No. of T- Slots & Size |
3 x 16mm |
Distance betn.T-Slots |
63mm |
Table swivelling on either size |
± 25 degree |
MOVEMENT |
|
Longitudinal - Manual |
600 mm |
- Feed |
525 mm |
Cross - Manual |
250 mm |
- Feed |
220 mm |
Vertical - Manual |
425 mm |
- Feed |
400 mm |
CUTTER SPINDLE |
|
Spindle taper |
ISO - 40 |
Front bearing |
32214 |
Head swivelling to both side |
± 25 degree± 25 degree |
SPEEDS |
|
No of Speeds |
8 (50 to 800) |
Range |
50 - 1000 RPM ( 50 - 2000 optional with flange mounted motor |
FEEDS |
|
No.of feeds |
16 |
Range - Longitudinal |
16 to 834 mm/min |
- Cross |
24 to 1251 mm /min |
- Vertical |
4 to 207 mm/min |
POWER |
|
Cutter spindle motor 1440 RPM |
2.2 kW/3 hp |
Feed motor 960 RPM |
2.2 kW/3 hp |
Coolant pump motor |
1 / 10hp |
PACKING DETAILS |
|
Floor space |
650 x 1170mm |
Height |
2150 mm |
Weight |
2600 Kgs (Approx.) |
Wood Box Size (L x B x H) |
1430 x 1725 x 2150 |
SPECIFICATION |
SA - 4H |
TABLE |
|
Working surface |
1680 X 250 mm |
No. of T- Slots & Size |
3 x 16mm |
Distance betn.T-Slots |
63mm |
Table swivelling on either size |
No degree |
MOVEMENT |
|
Longitudinal - Manual |
900 mm |
- Feed |
860 mm |
Cross - Manual |
320 mm |
- Feed |
300 mm |
Vertical - Manual |
550 mm |
- Feed |
525 mm |
CUTTER SPINDLE |
|
Spindle taper |
ISO - 40 |
Front bearing |
32214 |
Head swivelling to both side |
± 45 degree± 45 degree |
SPEEDS |
|
No of Speeds |
12 |
Range |
50 - 1000 RPM ( 50 - 2000 optional with flange mounted motor |
FEEDS |
|
No.of feeds |
16 |
Range - Longitudinal |
16 to 834 mm/min |
- Cross |
24 to 1251 mm /min |
- Vertical |
4 to 207 mm/min |
POWER |
|
Cutter spindle motor 1440 RPM |
3.7 kW / 5 hp |
Feed motor 960 RPM |
2.2 kW/3 Heavy |
Coolant pump motor |
1 / 10hp |
PACKING DETAILS |
|
Floor space |
650 x 1170mm |
Height |
2150 mm |
Weight |
3000 Kgs (Approx.) |
Wood Box Size (L x B x H) |
1430 x 1725 x 2150 |